Properties
Application
The electronic, micro-processed Controller DC-10 serves for temperature control of the heated sample lines PSG Extruded, PSG Plus Extruded, PSG Basic Flex and PSG Plus Extruded Hybrid. Also, for heating sleeves and heated wall ducts the controller is applicable
Technology
The Controller DC-10 is a PID-controller that can be parameterized in different levels for the individual needs of the respective devices. The controller can be operated from 110VAC up to 230VAC and 50Hz to 60Hz. The solid-state relay is already integrated and has 10A switching capacity. Controller is suitable for mobile use or wall mounting using the included mounting-plate.
Functions
The temperature-sensor input of the Controller DC-10 can be used, depending on the version, with a PT100, a Type J or a Type K sensor. The set value and the process value are permanently indicated by a two-color display. The controller has an output for L (load) and N (load) for direct connection to the heater. It comes factory assembled with a 6-pole Amphenol© plug type “Ecomate”. Red and green LEDs indicate the status of the output relay and if there are any errors. The set-points and parameters determining the process are adjusted by a 4-field foil keyboard.
You may also be interested in
Solid particle filters for reliable protection of the analyser against solid particles
Self regulating Sample Line up to 120°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes and small bending radius
Self regulating Sample Line up to 120°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes, fully certified for ATEX Zone 1: II 2G Ex IIC
Self regulating Sample Line up to 120°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes, fully certified for ATEX Zone 1: II 2G Ex IIB
Controlled Sample Line up to 180°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes, heating cable certified for ATEX Zone 1: II 2G Ex IIC und IEcEX
Self regulating Sample Line up to 120°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes
Controlled Sample Line up to 200°C holding temperature, pre-fabricated (no cut-to-length) wiith PTFE / PFA tubes, coextruded jacket extreme flexible
Controlled Sample Line up to 200°C holding temperature, pre-fabricated (no cut-to-length) with PTFE / PFA tubes, coextruded with extreme robust Ringwell Jacket
Controlled All-in-One Sample Line with 200°C holding temperature and configurations for the complete operation of the probe and preheated back purge air
Controlled Sample Line for up to 200°C holding temperature, cut-to-length with PTFE /PFA tubes, max. length 300m (heating circuit 73 m) and small bending radius
Regulated line for up to 200°C holding temperature, with 2 heated ends, can be shortened, max. 300 m (heating circuit length 73m), 2 x PTFE inner core.
Controlled Sample Line up to 180°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes, heating cable certified for ATEX Zone 1: II 2G Ex IIC und IEcEX
Controlled Sample Line up to 150°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes, heating cable certified for ATEX Zone 1: II 2G Ex IIC und IEcEX
Controlled Sample Line for up to 200°C holding temperature, cut-to-length for CEMS, max. length 300m (heating circuit 73 m) and up to PTFE /PFA inner tubes (exchangable as option)
Controlled Sample Line up to 200°C holding temperature, pre-fabricated (no cut-to-length) with PTFE / PFA tubes for CEMS, flexible PA 12 Jacket
Controlled Sample Line for up to 200°C holding temperature, cut-to-length for CEMS, max. length 300m (heating circuit 60 m) and up to 2 PTFE inner tubes
NO2/NO Converter as 19″ rack version with and without bypass valve or in stainless steel housing for wall mounting without bypass valve
Liquid Stop filter as protection of the analyser against intrusion of liquid particles down to 0,2µm
Heated Wall Bushings for 180°C Holding Temperature in various lengths
Heated Wall Bushings for 180°C Holding Temperature in various lengths
Corrosion resistant heated PTFE diaphragm sample gas pump , 10,5 l/min flow rate, Motor IP54, Heater IP20 for ATEX Ex II 2G Ex h IIB+H2 T4 Gb
Corrosion resistant PTFE diaphragm sample gas pump for low maintenance operation and compact design 7.5 l/min. flow rate, Motor IP66, Pump IP55 for ATEX Ex II 2G Ex h IIB+H2 T4 Gb
Corrosion resistant PTFE diaphragm sample gas pump for low maintenance operation 7,5 l/min. flow rate, IP54
Corrosion resistant PTFE diaphragm sample gas pump for low maintenance operation and compact design 5.5 l/min. flow rate, IP20
Corrosion resistant PTFE diaphragm sample gas pump (Integration into the MAK product line possible)
PID Temperature Controller for PSG Gas Sampling Probes and Heated Lines (tabletop device)
Condensate sensor for detecting condensate breakthrough in the analyzer system to protect the analyzer
Aerosol Filter for protection of the analyser against aerosols by durable corrosion resistant materials
Adsorption Filter filled with various adsorption materials by large reaction surface