Properties
Application
The self regulating heated sample lines series PSG Process Extruded ATEX2 are used for continuous extractive gas analysis. They serve primarily for the transport of the humid sample gas stream from the sample point to the analyser house. The holding temperature of the line thereby has to be above water vapour resp. acid dew point of the sample gas. In this way uncontrolled condensation of water vapour on the way to the analyser and therefore washing out of gas components in condensate is prevented. Also, failure of the measurement by a freezing line at ambient temperatures below 0°C is avoided.
By loading the video, you accept YouTube's privacy policy.
Learn more
Technology
The robust lines with thick-walled extruded flame resistant and extremely weather resistant TPU or PVC outer jacket are equipped with high quality self-regulating Raychem® heating cable. Insulation is done with a thermal or glass fibre fleece. For prevention of electrostatic charging the patented Ex2-technology is used. Depending on the used heating cable holding temperatures of up to 150°C at -20°C ambient temperature can be reached. Solutions down to -52°C are also possible. Up to 12 PTFE, PFA, stainless steel or special alloy tubes as internal line and also interchangeable internal tubes are available.
Functions
Because of the self-regulating heating cable for operation an additional temperature controller is not necessary. The heating cable consists of two parallel arranged supply conductors connected with an electrically conductive polymer plastic. During operation conductivity of the plastic is decreasing with increasing temperature due to molecular expansion until the heating cable specific maximum temperature is reached. When the heating cable temperature now drops the process reverses.
You may also be interested in
Self limiting Probe with 180°C holding temperature for use in IP 65 housing and explosion proof for ATEX Zone 1 II 2G Ex d IIC T3 and IEcEX
Self limiting Probe with 180°C holding temperature for use in IP 65 housing and explosion proof for ATEX Zone 1 II 2G Ex d IIC T3 and IEcEX
Self regulating Sample Line up to 120°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes and small bending radius
Self regulating Sample Line up to 120°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes, fully certified for ATEX Zone 1: II 2G Ex IIC
Controlled Sample Line up to 180°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes, heating cable certified for ATEX Zone 1: II 2G Ex IIC und IEcEX
Self regulating Sample Line up to 120°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes
Compressor Cooler for Process Measurement (outlet dew point optimized), 1-4 Gas Path, Heat Exchanger in various Materials, flow rates up to 500 l/h for ATEX EX II 2G Ex px de [ai] IIC T4 Gb
High Performance Compressor Cooler (outlet dew point optimized) with 1-4 Gas Path, Heat Exchanger in various Materials and flow rates up to 500 l/h
Compressor Cooler for Process Measurement (outlet dew point optimized), 1-2 Gas Path, Heat Exchanger in various Materials, flow rates up to 350 l/h for Atex-zone 2 (II 3G Ex nA nC T4 Gc)
Self limiting Probe with 90 °C holding temperature with explosion proof for ATEX Zone 1 II 2G Ex d IIC T3 Gb
Controlled Sample Line up to 200°C holding temperature, pre-fabricated (no cut-to-length) wiith PTFE / PFA tubes, coextruded jacket extreme flexible
Controlled Sample Line up to 200°C holding temperature, pre-fabricated (no cut-to-length) with PTFE / PFA tubes, coextruded with extreme robust Ringwell Jacket
Controlled All-in-One Sample Line with 200°C holding temperature and configurations for the complete operation of the probe and preheated back purge air
Controlled Sample Line for up to 200°C holding temperature, cut-to-length with PTFE /PFA tubes, max. length 300m (heating circuit 73 m) and small bending radius
Regulated line for up to 200°C holding temperature, with 2 heated ends, can be shortened, max. 300 m (heating circuit length 73m), 2 x PTFE inner core.
Controlled Sample Line up to 180°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes, heating cable certified for ATEX Zone 1: II 2G Ex IIC und IEcEX
Controlled Sample Line up to 150°C holding temperature, cut-to-length with PTFE / PFA or stainless steel tubes, heating cable certified for ATEX Zone 1: II 2G Ex IIC und IEcEX
Controlled Sample Line for up to 200°C holding temperature, cut-to-length for CEMS, max. length 300m (heating circuit 73 m) and up to PTFE /PFA inner tubes (exchangable as option)
Controlled Sample Line up to 200°C holding temperature, pre-fabricated (no cut-to-length) with PTFE / PFA tubes for CEMS, flexible PA 12 Jacket
Controlled Sample Line for up to 200°C holding temperature, cut-to-length for CEMS, max. length 300m (heating circuit 60 m) and up to 2 PTFE inner tubes
Heated Wall Bushings for 180°C Holding Temperature in various lengths
Heated Wall Bushings for 180°C Holding Temperature in various lengths
Corrosion resistant PTFE diaphragm sample gas pump for low maintenance operation and compact design 7.5 l/min. flow rate, Motor IP66, Pump IP55 for ATEX Ex II 2G Ex h IIB+H2 T4 Gb
PID Temperature Controller for PSG Gas Sampling Probes and Heated Lines (tabletop device)
PID Temperature Controller for PSG Gas Sampling Probes and Heated Lines (tabletop device)