Properties
Application
The heated gas sampling probes series PSG Plus Probe are used for continuous extractive gas analysis. They enable trouble-free representative sampling of hot predominantly dust and water vapour loaded gases. Typical applications are emission measurement, process monitoring and process optimization.
By loading the video, you accept YouTube's privacy policy.
Learn more
Technology
The intelligent design with optimum gas guidance enables the filtration of sample gas at the outer filtration surface of 212cm2 (largest on the market) as well as comfortable and quick filter change without tools and dismounting of the heated sample line. Extremely simple maintenance of the PSG Plus Probe is enabled due to a sophisticated corkscrew mechanism, which allows opening without effort also at sticking filter housing lid. The holohedral tight high performance ring heater in combination with the tight thick-walled glass fibre insulation jacket ensures a homogeneous heating of the complete PSG Plus Probe to 180°C.
Functions
Due to the largest filtration surface on the market in combination with the homogeneous heating dust will always be separated reliably in the PSG Plus Probe without condensation of water vapour and therefore without blocking of the filter. For elevated dust concentrations of up to 40g/m3 resp. 280g/m3 the PSG Plus Probecan be equipped with an ultimate effective single or dual stage back purging with tubing of 12mm outer diameter which is unique on the market. This way filter chamber (single stage) as well as filter are purged thoroughly. The standard calibration resp. test gas connection enables the use of the PSG Plus Probe within emission measuring systems according to 13. and 17. BImSchV (EU-regulations 2000/76/EG and 2001/80/EG).
You may also be interested in
Sampling Tubes in various materials and length for different applications
6 mm / 8 mm Pressure Reduction Valve for Protection of the Sampling System
Self limiting Probe with 180°C holding temperature for use in IP 65 housing and explosion proof for ATEX Zone 1 II 2G Ex d IIC T3 and IEcEX
Self limiting Probe with 180°C holding temperature for use in IP 65 housing and explosion proof for ATEX Zone 1 II 2G Ex d IIC T3 and IEcEX
Self limiting mobile Probe heated up to 180°C holding temperature for temporary CEMS
Controlled Probe up to 200°C holding temperature and double back purge for Process measurement with high dust load
Controlled DeNOx Probe up to 315°C holding temperature for SCR and SNCR applications with separator vessel for Ammonia salts
Self limiting Probe with 90 °C holding temperature with explosion proof for ATEX Zone 1 II 2G Ex d IIC T3 Gb
Self-regulating or regulated duo probe up to 250°C holding temperature for simultaneous sampling from 2 outlets at low to medium dust loadings
Self regulating or controlled Probe heated up to 200°C holding temperature for CEMS and low to medium dust load
Temperature controlled Heated Sample Tubes for 180°C Holding Temperature
PID Temperature Controller for PSG Gas Sampling Probes and Heated Lines (tabletop device)